Vortex Flow Measurement for Gas, Liquid and Steam Applications

by | Aug 19, 2014 | Measurement Instrumentation

Jim Cahill

Jim Cahill

Chief Blogger, Social Marketing Leader

When it comes to measuring flow, you have many choices among technologies. For gas, liquid, and steam flow metering applications, vortex technology is an option.

If you’re unfamiliar with how Vortex flow meters work, Wikipedia describes it:

Another method of flow measurement involves placing a bluff body (called a shedder bar) in the path of the fluid. As the fluid passes this bar, disturbances in the flow called vortices are created. The vortices trail behind the cylinder, alternatively from each side of the bluff body. This vortex trail is called the Von Kármán vortex street after von Kármán’s 1912 mathematical description of the phenomenon. The frequency at which these vortices alternate sides is essentially proportional to the flow rate of the fluid. Inside, atop, or downstream of the shedder bar is a sensor for measuring the frequency of the vortex shedding. This sensor is often a piezoelectric crystal, which produces a small, but measurable, voltage pulse every time a vortex is created. Since the frequency of such a voltage pulse is also proportional to the fluid velocity, a volumetric flow rate is calculated using the cross sectional area of the flow meter. The frequency is measured and the flow rate is calculated by the flowmeter electronics using the equation f=SV/L where f is the frequency of the vortices, L the characteristic length of the bluff body, V is the velocity of the flow over the bluff body, and S is the Strouhal number, which is essentially a constant for a given body shape within its operating limits.

Robert Zaun Marketing Director

Robert Zaun
Marketing Director

In this short 2:53 YouTube video, The Rosemount 8600 Utility Vortex, Emerson’s Robert Zaun explains how the Rosemount 8600 Utility Vortex flowmeter is optimized for general purpose gas, liquid, and steam flowmetering applications—where the fluids need to be homogeneous and single-phase.

He opens highlighted some of the strengths in vortex flow measurement technology such as no moving parts, excellent rangeability (“the ratio of the maximum full scale range to the minimum full scale range of the flowmeter”) and a 30-to-1 turndown ratio.

To address noise at low flow rates, Robert describes adaptive digital signal processing (ADSP) to help extend the rangeability of the meters and along with using a mass-balanced sensor, minimize the impact of vibration in the process.

He also highlighted the flow simulation capability which simulates the vortex signal coming from the process to verify correct operation of the transmitter. This provides in-situ verification which means the meter does not have to be removed from the line to verify that the electronics in the transmitter are working properly.

You can connect and interact with other flow measurement peers in the Flow track of the Emerson Exchange 365 community.

Popular Posts

Comments

Follow Us

We invite you to follow us on Facebook, LinkedIn, Twitter and YouTube to stay up to date on the latest news, events and innovations that will help you face and solve your toughest challenges.

Do you want to reuse or translate content?

Just post a link to the entry and send us a quick note so we can share your work. Thank you very much.

Our Global Community

Emerson Exchange 365

The opinions expressed here are the personal opinions of the authors. Content published here is not read or approved by Emerson before it is posted and does not necessarily represent the views and opinions of Emerson.

PHP Code Snippets Powered By : XYZScripts.com